ISRO achieved a milestone on Thursday with the successful hot testing of liquid rocket engine manufactured through Additive Manufacturing (AM) technology or 3D printing technology for a duration of 665 s.
“The engine used is the PS4 engine of PSLV upper stage. The PS4 engine manufactured in the conventional machining and welding route has been in use for the fourth stage of PSLV which has a thrust of 7.33 kN in vacuum condition,” said ISRO.
The same engine is also used in the Reaction Control System (RCS) of the first stage (PS1) of PSLV. The engine uses the earth-storable bipropellant combinations of Nitrogen Tetroxide as oxidizer and Mono Methyl Hydrazine as fuel in pressure-fed mode and was developed by the Liquid Propulsion Systems Centre (LPSC), ISRO.
“LPSC redesigned the engine making it amenable to the Design for Additive Manufacturing (DfAM) concept thereby gaining considerable advantages. The Laser Powder Bed Fusion technique employed has brought down the number of parts from 14 to a single-piece, and eliminated 19 weld joints, saving significantly on the raw material usage per engine (13.7 kg of metal powder compared to the 565 kg of forgings and sheets for conventional manufacturing process) and reduced 60% in the overall production time,” ISRO said.
The manufacturing of the engine was done in M/s WIPRO 3D, and the engine was hot tested at ISRO Propulsion Complex, Mahendragiri.
