Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Tom’s Guide
Tom’s Guide
Technology
Ruth Hamilton

Did Covid kill mattress comfort?

Pile of mattress foam in the 3Z mattress factory

When shopping for a new mattress, one of the key specs to pay attention to is the density of the foam. Broadly, the denser the foam, the better the quality, and the more durable and expensive it will be. The best memory foam mattresses all feature dense foam as their comfort layer. But according to a mattress manufacturing expert, a shift has taken place over the past few years, where we're seeing bed brands using lower-quality foams. And it's the pandemic that's to blame. Don't panic though, because it might not be the worst news. 

I visited the a factory in Arizona where many of the best mattresses in America are made (it officially belongs to 3Z Brands – encompassing so Helix, Brooklyn Bedding, Birch, Bear, Nolah and Leesa – but it also manufactures mattresses from a load of the other leading sleep brands in the US). There, I got the low-down on the different types of mattress foam from Tim Dilworth, a retail and manufacturing exec with six years' experience in the mattress industry. Here's what he had to say about the changes in how bed in a box mattresses are made during that time...

Covid versus mattress comfort

"Prior to the Covid pandemic, you saw more 3 and 4lb foams in mattresses. The pandemic, among other things, created a real shortage in foam, and foam prices went through the roof. A lot of beds got re-specced into 2.5lb or even a 2lb comfort layer, just because you couldn't get [the denser foams]."

Foam density cheatsheet

For the comfort (upper) layer of your mattress, these are the densities to look for:

3-4lb foam – Overkill
2.5lb foam – Ideal
1.8lb foam – Acceptable
1.5lb foam – Minimum

Interestingly, Tim believes that's not a bad thing, because above 2.5lb, there's only a marginal increase in comfort. He explains that during the initial bed-in-a-box boom around 2016-2018, there were so many new brands joining the market that they needed to find a way to distinguish themselves from the sea of competitor products. Because people were buying online and couldn't actually feel the mattress before making their decision, one way to show quality was through metrics. Being able to say, 'We have the densest foam' was a clear way to indicate quality to potential customers.

Tim sees the shifts to less dense foams as a sensible adjustment. "Post-pandemic we saw a lot of that get rationalized to something that makes more sense," he explains. "The industry found you can build just as good-feeling mattresses [that are] just as good quality, or nearly as good quality, at better prices for customers."

Blocks of foam ready to be sliced up at the 3Z Brands factory (Image credit: Future / Ruth Hamilton)

What's the best density for a memory foam mattress?

Look for a 2.5lb foam. For 3Z Brands, that's the sweet spot between comfort and price, and is what should be used in mattresses in the mid-range bracket (so around $800-$1,200 for a queen).

"For us, 2.5lb is a real nice, dense foam to work with. It's going to have really great durability and provide a really great feel in combination with the other layers of the bed," says Tim. "If you're going to sort of be in that $1,000ish mattress [category], we think it's important that a significant layer of that is 2.5lb foam. It's the right mix of economy and quality for that sort of fit of mattress."

As we get into in our memory foam FAQ article, it's important to note that foam density does not define firmness: you can have 3lb firm foams, and you can have 3lb soft foams. Similarly, it doesn't define how responsive the foam is (slow-moving, as shown in the video below, or bouncy and fast-moving). 

Is a 3lb / 4lb foam mattress more comfortable?

Perhaps… but it'll be marginal. These super-dense foams were popular before the pandemic, and are still found in some of the best luxury mattresses today. But at a certain point, Tim says you won't feel the benefit. "You're ultimately going to end up paying more, [because] there's literally more raw material in those layers. And at some point, there's a diminishing return against that from a consumer standpoint."

That's especially true if these dense foams are being used for firmer or lower-level tiers of the mattress. "Using a [dense, expensive] firm foam is sort of silly, because you really don't want to get into the foam anyway. Firm kind of feels like firm, right? [It makes no difference] if it's really expensive foam or really cheap foam," says Tim. "It's kind of a marketing gimmick at that point, because it doesn't matter."

What's the least-dense foam you can get away with?

If you're on a tighter budget, you might need to make a trade-off and go for some slightly less dense foam. Tim says a density of 1.8lb is acceptable, or 1.5lb at an absolute minimum.

"If you see foam less than 1.5lb I would start to get hesitant. We don't use anything under 1.5lb. You know, if that's what you can afford, and that's your budget, that's okay. But the durability when you get below 1.5lb, in our mind, makes us nervous."

The way a bed is stored plays into it here – if a bed is going to be roll packed for more than a few weeks, 3Z Brands like it to be 1.8lb density, to ensure it springs back into shape correctly. 

How can I find information about foam density?

It's easier said than done. Most brands don't publish information about the density of each foam layer, perhaps to give themselves flexibility if they need to make changes. Dig into the specs section of your mattress, or try requesting the information from a customer service rep, but you might struggle to get an answer. 

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
One subscription that gives you access to news from hundreds of sites
Already a member? Sign in here
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.