Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Advnture
Advnture
Pat Kinsella

Berghaus MTN Guide Hyper Alpha waterproof jacket review: it’s what’s on the inside that counts

Hiker wearing Berghaus MTN Guide Hyper Alpha.

Berghaus MTN Guide Hyper Alpha: first impressions

On the surface, the Berghaus MTN Guide Hyper Alpha looks like a standard shell jacket, but it has a fleecy secret on the inside (Image credit: Pat Kinsella)

At first sight, the Berghaus MTN Guide Hyper Alpha looks similar to many other lightweight shell layers, but when you open it up you’re in for a surprise: the interior is lined with a thin, fleecy material, designed to provide some extra warmth to your sides, back and arms.

It’s an unusual look – not least because this fluffy stuff is bright red, which contrasts dramatically with the rather gloomy gray-and-black colorway that the men’s version of the coat comes in. But no-one can see the inside when you’re wearing the jacket.

So the more important question is: does it improve the garment’s performance? There was only one way to find out, so I hit the chilly rain-strafed trails and put it to test, to see how it compares with the best waterproof jackets on the market.

Berghaus MTN Guide Hyper Alpha: design and materials

Water beads off the outer layer of the jacket, made from Berghaus’s Hydroshell Elite fabric, which has a hydrostatic head rating of around 12,000mm (Image credit: Pat Kinsella)
Specifications

• List price: £290 (UK) / €300 (EU)
• Versions: Men’s / Women’s
• Sizes: Men’s: XS-XXL; Women’s: XS-XXL
• Waterproof rating: 12,000mm HH
• Breathability rating: 50,000+ g/m2/24hrs
• Materials: Hydroshell Elite with Polartec Alpha panels (100% polyamide / 100% polyester)
• Weight (Men’s large): 9.25oz / 262g
• Colors: Gray & Black (men's); Women’s: Black / Goji Berry & Jet Black (women's)
• Compatibility: Hiking, trekking, climbing, fastpacking, winter trail running

The outer layer of this Berghaus jacket is made with the brand’s Hydroshell Elite fabric, an impressively lightweight, 2.5 layer, PU-based waterproof and breathable membrane-based material with a hydrostatic head rating of around 12,000mm. Designed for dynamic activities such as climbing and mountaineering, Hydroshell Elite fabric offers 6D ripstop durability and it scores very well for breathability during lab tests (something that could be affected by the addition of fleece panels).

British brand Berghaus have built a whole range around this material, but what’s more surprising and innovative about this particular jacket is the use of Polartec Alpha fleece panels on the inside, positioned in the places where you really need to keep warm – so around your vital organs and along your arms – which arguably make it a 3.5-layer jacket.

Other design elements include high-placed hand pockets, so you can access them while wearing a climbing harness or hiking backpack, elasticated cuffs and a rather minimalist hood with a single adjustment toggle. It has an extended back panel, to protect your bum, and an adjustable hem. There’s a reflective logo on the arm, but nothing on the back, which feels like an omission.

The Berghaus MTN Guide Hyper Alpha comes with its own stuff sack and packs down impressively small (Image credit: Pat Kinsella)

The jacket doesn’t stuff away into a pocket, like many similar coats do, but it does come with its own little carry sack so you can easily pop it into a hiking backpack or a daypack and take it along in case the weather turns against you. In fact, it’s so light and packable that it will even fit into a running vest or hydration pack, which makes it an excellent emergency layer for taking out on longer runs and ultra events, because it offers real warmth as well as protection from rain and wind.

Meet the reviewer

Berghaus MTN Guide Hyper Alpha: on the trails

The Berghaus MTN Guide Hyper Alpha’s hood is a little flimsy (Image credit: Pat Kinsella)

I’ve been wearing the Berghaus MTN Guide Hyper Alpha jacket while hiking, scrambling, running and climbing around the increasingly wet hills and crags of the South West of England. It’s the first time I’ve tested a garment made with Berghaus’s Hydroshell Elite fabric, and I’ve been impressed. I’ve had plenty of jackets with a higher hydrostatic head rating than this one offers, but it has proved reliably waterproof and windproof in all kinds of conditions. The fabric is lovely and quiet for a solidly weatherproof outer layer too – there’s no rustling or swishing sound as you swing your arms while walking or running, and it’s nice and soft too, so it doesn’t impede your movements whatsoever.

I’ve also found the jacket to be very breathable, somewhat to my surprise. I know the Hydroshell Elite fabric scores very well in breathability lab tests, but I did think the inclusion of the Polartec Alpha fleece panels might significantly impact that. So far as I can tell, although I do obviously feel warmer in this jacket than non-insulated shell layers, the breathability of the garment hasn’t been too badly affected.

The Polartec Alpha panels are truly intriguing. In my experience, they certainly provide an impressive degree of warmth, considering how minimalist they are, but they don’t completely remove the need to wear a proper fleece jacket when conditions get genuinely wintery. In one sense, this is the perfect shoulder-season jacket – a garment you can wear when you need to keep rain and wind chill at bay, but the temperature isn’t cold enough to warrant wearing a substantial mid layer and a shell jacket. Used like this, it also makes for an excellent winter running jacket. On the other hand, when the mercury really drops, you can layer up with a fleece along with this jacket for a whole extra level of warmth. That said, the fit of the jacket isn’t super spacious, so unless you size up you will struggle to fit a puffer mid layer beneath it.

Polartec Alpha panels do add warmth but they don’t negate the need for an extra fleece layer when the temperature really drops (Image credit: Pat Kinsella)

There are some downsides to the MTN Guide Hyper Alpha, though. Even with an anti-bacterial treatment, the fleecy insulation means it will collect odors more than other shell layers, and will therefore require more laundering. I’m not a huge fan of the basic elasicated cuffs (Velcro fasteners provide a more secure connection when you’re wearing hiking gloves) and I found the storm peak on the hood to be a bit flimsy.

I think there should be a reflective flourish somewhere on the rear of the jacket, for safety when you’re out on roads shared with vehicles, and while the separate stuff sack is good for storing and carrying the coat, I just know I’m going to misplace it pretty quickly, and I’d rather see a pocket being used for this purpose. And – my pet hate with waterproof jackets – it lacks pit vents, which are by far my favored way to control my temperature while wearing an outer shell during dynamic activity (although, I concede they do add weight and chunkiness, which this jacket is trying to avoid).

Overall, though, the MTN Guide Hyper Alpha is a really decent water- and wind-proof jacket that continues to breathe well, while offering a significant degree of thermal protection very few (if any) other shell layers supply. It performs well in the hills and weighs next to nothing whether you’re wearing it or carrying it. I feel it’s better for climbers and runners than hikers, but it’s a solid performer across a range of pursuits.

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
One subscription that gives you access to news from hundreds of sites
Already a member? Sign in here
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.