Get all your news in one place.
100’s of premium titles.
One app.
Start reading
InsideEVs
InsideEVs
Technology

Feds Probe Ford BlueCruise Following Fatal Crash

The National Transportation Safety Board has launched an investigation into a fatal crash involving a Ford Mustang Mach-E equipped with Ford's Level 2 driver assistance system, BlueCruise.

The crash took place on I-10 near San Antonio, Texas late last month. According to reports, the Mustang Mach-E collided with a Honda CR-V stopped in the center lane of an interstate at around 10 PM. The stationary CR-V reportedly had no lights on, which may have resulted in the Mach-E's cameras being unable to pick up the object and engage Automatic Emergency Braking.

Get Fully Charged

NTSB's Requires Certain Driver-Assistance-Related Crashes to be Reported

The NTSB is no stranger to probing crashes involving Level 2 driver assistance features. In fact, the agency requires that any crashes be reported if they involve a Level 2 driver-assistance feature if the accident resulted in a fatality, a vehicle tow-away, an airbag deployment, or if any individual is transported to a hospital for medical treatment.

At the center of the investigation is Ford's Level 2 driver assistance system: BlueCruise. Ford markets the $75-per-month tech as a "hands-free highway driving feature" when driving on prequalified sections of divided highways. Ford says it has mapped out more than 130,000 miles of roads in North America to be compatible with its hands-free feature, which includes a large section of highway I-10 outside of San Antonio.

However, given that the system is defined as a Level 2 driver-assistance feature, the person behind the steering wheel is considered to be responsible for the car's operation at all times.

 

According to an accident report obtained by InsideEVs, the Mach-E had "partial autonomy" active at the time of the crash. It's not clear whether the hands-off feature itself was engaged at the time of the crash, however, the NTSB mandates that fatal accidents involving Level 2 driver-assistance systems engaged 30 seconds prior to a collision are reported to the agency.

Get the InsideEvs Newsletter
Sign Up Today

Ford has BlueCruise hardware standard on most compatible Ford vehicles starting late last year. Reports indicate that the Mach-E involved in the crash was equipped with BlueCruise, likely prompting the investigation to determine if the feature was engaged and what exactly may have happened in the moments leading up to the crash.

At this point, the probe is preliminary and meant to gather more information about the crash. NTSB issued the following statement on the purpose of its investigation:

NTSB is investigating this fatal crash due to its continued interest in advanced driver assistance systems and how vehicle operators interact with these technologies. A team of investigators from the NTSB’s Special Investigations Branch of the Office of Highway Safety will travel to San Antonio to examine the wreckage and collect information about the accident site and sequence of events leading to the collision.

If BlueCruise was enabled, the inability to detect the stationary vehicle late at night isn't exactly surprising. Most driver assistance systems, including adaptive cruise control systems with AEB, ignore stationary objects. This is because most systems are tuned to utilize long-range radar to gauge the distance of moving objects, not stationary ones.

If the car's vision-based camera system is unable to detect the vehicle and its radar system is tuned to ignore stationary objects, a non-moving vehicle parked late at night without lights on may have been undetectable until the collision.

A preliminary report outlining the NTSB's findings is expected to be issued in about a month.

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.